Open 24 hours, 7 days Family owned · Roseville & Greater Sacramento We get back to you within 24 hours
Our services

Everything we do, explained plainly

Bird control is our specialty, done humanely and done right the first time. And while we're up on your roof, we can take care of the windows, solar panels and gutters too. Every job starts with a free inspection.

Bird control

Mesh stops entry to vents and eaves, spikes stop perching on ledges and gutters, and screens protect your solar panels. Most homes need a layered mix, with no gaps left for birds to slip through.

Illustration: bird mesh fastened along the underside of a roof eave
Bird control

Bird Mesh & Critter Guard Installation

Bird mesh and critter guards block pigeons and smaller birds from nesting under eaves, in attics and around vents, especially near rooflines and solar panel edges during nesting season. The mesh is durable and nearly invisible once installed, and it stops birds without harming them. Critter guards add extra protection around dryer vents and pipes.

We find every gap and entry point on your property, then fit the mesh securely so it holds through the weather shifts and seasons we get here.

Bird mesh

  • Fits around gutters and downspouts
  • Blocks roof vents and soffit entry points
  • Durable in Sacramento sun and weather

Critter guard for solar panels

  • Seals gaps between panel frame and roof
  • Protects the electrical connections inside the array
  • Non-invasive materials

Vent & eave protection

  • Covers roof vents and ridge vents
  • Seals open eaves and soffit gaps
  • Keeps airflow and drainage working
What if birds are already nesting in my gutters?

We remove the nests and debris and clean your gutters first, then install the mesh. That gives a proper seal and keeps birds from returning to the same spot.

Will mesh affect my gutters or roof vents?

No. Water still drains and air still flows. Mesh and critter guards are non-invasive and can be removed without harming your roof or siding.

Can you install mesh on older homes?

Yes. We look at each home's architecture and condition and fit the mesh to older homes, newer construction and any roof style.

Illustration: stainless steel bird spikes along a gutter under a terracotta tile roof
Bird control

Bird Spike Installation

Bird spikes are thin, pointed strips that stop pigeons from landing and roosting on ledges, gutters and railings, where they leave droppings and cause damage. They're stainless steel, rust-resistant and built to last through every season. They don't harm birds; they simply make perching uncomfortable.

Placement is everything. We follow the contour of your roofline and edges for continuous coverage, because a gap is just a new place to land.

  1. InspectFind roosting spots and entry points
  2. PlanMap spikes for ledges, gutters and trim
  3. InstallSecure, quiet, no damage to surfaces
  4. CheckTest coverage and explain upkeep

Where spikes go

  • Ledge and parapet spikes
  • Gutter and soffit protection
  • Architectural feature coverage
Are bird spikes safe for the birds?

Yes. Spikes are a humane deterrent. They discourage landing but don't injure birds. No poison, no traps.

When should I use mesh instead of spikes?

Use mesh where spikes can't reach or where birds have already nested, like soffit vents, eaves and under solar panels. Spikes are for perches. Many homes use both.

Can spikes go on any surface?

They work best on ledges, gutters, parapets, vents, solar panel frames and trim. For spots spikes can't reach, we'll recommend mesh or another approach.

Illustration: a technician clipping pigeon screen along the edge of a solar panel array
Bird control · most requested for solar homes

Pigeon Screen Installation Around Solar Panels

Solar panels make perfect nesting spots. Pigeons hide underneath, leaving droppings and nesting debris that build up around the wiring and hardware. A pigeon screen fits snugly around the edge of your array: the mesh is small enough to keep birds out but lets air flow, so your panels stay cool. It's UV-resistant and made for rooftop life through summer heat and winter rain.

We work carefully around electrical connections and mounting hardware, and you keep access to the panels for maintenance and inspections.

  1. InspectCheck the array for nests, droppings and entry points
  2. Clean & clearRemove nesting material and debris from under the panels
  3. InstallFit the screen tightly with non-invasive fasteners
  4. Final checkVerify every seal so they can't find another way in

What you get

  • Custom-fit perimeter screening
  • No interference with how your system runs
  • Long-lasting, low-maintenance protection

Pairs well with

  • Bird spikes on roof edges and trim, where pigeons land first
  • Solar panel cleaning to clear droppings and dust
Why do birds nest under solar panels?

Panels provide shelter, shade and protection from predators, which makes the space underneath ideal for pigeons.

Do spikes work on their own, or do I need a screen too?

Spikes stop landing, but they won't block the space under the panels. The screen is the barrier. Many homeowners use both: spikes on visible perches and a screen around the array.

What if pigeons are already nesting under my panels?

We clear the nests and debris first and clean up the area. Then the screen goes on so they can't return.

Cleaning

Windows, solar panels and gutters, for homes and businesses. Book them on their own, or add them on while we're already out for bird control.

Illustration: freshly cleaned windows on a stucco home at sunset
Cleaning

Window Cleaning

Dirt, dust and mineral deposits build up fast here, dulling natural light and your home's curb appeal. Regular professional cleaning restores clarity and protects the glass from the long-term wear of seasonal pollen and hard water.

We clean interior and exterior glass, frames and sills, using safe techniques suited to homes and commercial properties. No ladders for you, no streaks.

What we clean

  • Interior and exterior glass
  • Frames and sills
  • Homes and storefronts

How often

  • Homes: 2 to 4 times a year
  • Storefronts: monthly or as needed
Why hire a pro instead of doing it myself?

DIY window cleaning risks falls, streaks and damage. We bring streak-free solutions, the right technique and proper safety gear.

Are your cleaning products safe for family and pets?

We use environmentally safe, non-toxic solutions that clean well without leaving harmful residue.

Illustration: solar panels being cleaned with a soft brush and water
Cleaning

Solar Panel Cleaning

Dust, bird droppings and pollen collect on solar panels, and our dry climate and spring blooms make it build up quickly. We use gentle, non-abrasive methods, soft brushes and deionized water, to remove buildup without scratching panel coatings or leaving mineral spots.

Rooftop work is risky. We bring the safety equipment and training so you don't have to climb up there yourself.

  1. InspectPanel condition, roof access and a safe plan
  2. PrepareSet up safety gear and the right tools
  3. CleanSoft brushes and deionized water
  4. VerifyCheck each panel and clear debris around it

Who it's for

  • Single-story and multi-story homes
  • Commercial arrays, scheduled around your business
  • Pairs with gutter and window cleaning
How often should solar panels be cleaned?

Most homes do well with a yearly or twice-yearly cleaning. Dusty or pollen-heavy seasons may call for more. We'll suggest a schedule for your home.

Can you clean after it rains?

After light rain, once the surfaces are safe to work on. Heavy rain or storms mean we reschedule around the weather.

Illustration: water running freely through a freshly cleaned gutter
Cleaning

Gutter Cleaning

Clogged gutters overflow, and the water ends up against your fascia, siding and foundation. We clear leaves, twigs and dirt by hand, bag the debris and take it away, so your yard stays clean too.

Then we flush the downspouts to make sure water runs freely to the ground, and point out any dents, rust, separation or missing fasteners we spot along the way.

  1. InspectLook for blockages, damage and standing water
  2. ClearDebris removed by hand, bagged and hauled off
  3. FlushDownspouts cleared so water flows away
  4. Walk-throughWe show you what we found and why

Every visit includes

  • Gutter cleaning by hand
  • Downspout flushing
  • A quick inspection for damage

How often

  • At least twice a year: fall and spring
  • More often with lots of trees nearby
Do you service gutter guards?

Yes. We clean gutters with or without guards and work with whatever system you have.

Why does downspout flushing matter?

Downspouts clog with debris and silt, and water backs up into the gutters. Flushing makes sure it flows to the ground, away from your foundation.

Not sure what you need?

That's what the free inspection is for. We'll take a look, explain what's going on, and recommend the right fix.

Free inspection & quote

Rather talk? Call or text (973) 662-4737

Step 1 of 4

What can we help with?

Pick as many as you like.

Services
Your request: nothing picked yet